1. RAID — Concepts

What is RAID?

RAID stands for two things historically:

Acronym Meaning
Redundant Array of Inexpensive Disks Original meaning — cheap disks used together
Redundant Array of Independent Disks Modern preferred meaning

The core idea: combine multiple physical disks into one logical storage unit to gain redundancy (protection against disk failure), performance, or both.

Why RAID Exists

Without RAID, if one disk in a set fails, all data on it is lost permanently. RAID was invented to solve this by keeping copies or recovery information spread across multiple disks.


Hardware RAID vs Software RAID

Feature Hardware RAID Software RAID
Implementation Dedicated RAID controller card Done by the OS/kernel
Cache Has hardware cache (with battery backup) No hardware cache
Speed Faster (historically) Comparable on modern SSDs
Portability Disks tied to specific controller Works on any disk or partition
Cost Expensive Free
Flexibility Fixed to controller type Can mix any disk type or partition

Software RAID in Linux:


Common RAID Levels

RAID Level Also Known As Min Disks Disk Failure Tolerance How It Works Usable Space
RAID 0 Striping 2 0 (no redundancy) Writes alternately across disks 100%
RAID 1 Mirroring 2 1 disk Exact copy written to all disks 50% (2 disks)
RAID 5 Striping + Parity 3 1 disk Data + single parity spread across disks (N-1)/N
RAID 6 Striping + Double Parity 4 2 disks Data + two parity sets spread across disks (N-2)/N
RAID 10 RAID 1+0 4 1 per mirrored pair Mirror pairs, then stripe across pairs 50%

RAID 5 Usable Space Formula

Usable Space = (1 - 1/N) x Total

Example with 3 x 5 GB disks:
N = 3
Usable = (1 - 1/3) x 15 GB = 10 GB
One disk worth of space is used for parity.

Example with 4 x 5 GB disks:
N = 4
Usable = (1 - 1/4) x 20 GB = 15 GB